• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. However If you have double pane windows that are secured by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this situation you'll need to source some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor and could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your property until a professional is able to repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is large, you might need to consider a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. Over time, they can develop a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows to access the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you can't reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do a test fitting. The corners of the sash should align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you awake each day to find a smoky wall and wet floors. Water leaks from windows are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the problem is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze it could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's easy to change the hinges on a window, but it's easier if someone helps you hold the frame.

Verify that the upvc window repair - cool training - hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer advice.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause an opening to appear between the sash and the frame. If they're beyond repair, it could be necessary to have them realigned. In addition, the interlock could also become disaligned. This happens on the hinge's side and could require to be cleaned. In some instances it might be necessary to replace these.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be cheaper to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as you can.